Risk Analysis of Breakwater Caisson Under Wave Attack Using Load Surface Approximation     

Dong Hyawn KIM 《中国海洋工程》2014,(6):739-748

A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called load surfaces, which can be estimated as functions of wave height, water level, and so on. Then, the first-order reliability method（FORM） can be applied to determine the probability of failure under the wave action. In this way, the reliability analysis of breakwaters with uncertainties both in wave height and in water level is possible. Moreover, the uncertainty in wave breaking can be taken into account by considering a random variable for wave height ratio which relates the significant wave height to the maximum wave height. The proposed approach is applied numerically to the reliability analysis of caisson breakwater under wave attack that may undergo partial or full wave breaking.  相似文献   

A stress and displacement discontinuity element method for elastic transversely anisotropic rock     

A. Bobet  V. García Marín 《国际地质力学数值与分析法杂志》2014,38(18):1898-1922

The paper presents closed‐form solutions for stress and displacement influence functions for stress discontinuity (SD) and displacement discontinuity (DD) elements, for a two‐dimensional plane‐strain elastic, transversely anisotropic medium. The solutions for SD elements are based on Kelvin's problem and for DD elements on the concept of dipoles. Stress and displacement influence functions are derived for the following elements: constant SD, linear SD, constant DD, linear DD, square root DD, parabolic DD, constant DD surface, and linear DD surface elements. The formulations are incorporated into FROCK, a hybridized boundary element method code, and are validated by providing comparisons between the results from FROCK and the finite element code ABAQUS. A limited parametric analysis shows the effects of slight anisotropy on the stress field around the tip of a crack and of the orientation of the crack with respect to the axes of elastic symmetry. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads     

Juan Wang  Hai‐Sui Yu 《国际地质力学数值与分析法杂志》2014,38(4):331-348

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

基于ABAQUS的深水连接器连接性能分析     

曹博  蔡志杰  石中玉  张玉龙  段梦兰 《海洋工程》2020,38(3):132-139

为解决现有深水连接器连接性能研究中力学分析建模不准确,且缺乏抗弯抗扭能力分析的问题,基于ABAQUS有限元分析软件对深水连接器进行三维模型动态仿真分析,对连接器的受力、密封性能以及在实际工程需求中不同内压下的抗弯及抗扭性能进行深入研究。结果表明:在安装及生产两种工况下,深水连接器各部件除密封环外受力均满足其强度设计要求,密封环接触表面发生合理塑性变形,满足密封要求;随着内压的增加,深水连接器的抗弯能力逐渐下降,抗扭能力则呈现增加的趋势;极限弯矩分别在0 MPa与35 MPa内压下的判定依据为密封失效,在14 MPa与52 MPa内压下的判定依据为下毂座屈服,而极限扭矩在不同内压下的判定依据均为密封失效。  相似文献   

KK型管节点应力集中系数几何敏感性分析     

林海花  孙承猛  石强 《海洋工程》2020,38(6):142-150

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。  相似文献   

A sequential sparse polynomial chaos expansion using Bayesian regression for geotechnical reliability estimations     

Qiujing Pan  Xingru Qu  Leilei Liu  Daniel Dias 《国际地质力学数值与分析法杂志》2020,44(6):874-889

Polynomial chaos expansions (PCEs) have been widely employed to estimate failure probabilities in geotechnical engineering. However, PCEs suffer from two deficiencies: (a) PCE coefficients are solved by the least-square minimization method which easily causes overfitting issues; (b) building a high order PCE is often computationally expensive. In order to overcome the aforementioned drawbacks, the Bayesian regression technique is employed to evaluate PCE coefficients, which not only provides a sparse solution but also avoids overfitting. With the aid of the predictive means and variances given by Bayesian analysis, a learning function is proposed to sequentially select the most informative samples that are critical to build a PCE. This sequential learning scheme can highly enhance the computational efficiency of PCEs. Besides, importance sampling (IS) is incorporated into the sequential learning (SL)-PCEs to deal with geotechnical problems with small failure probabilities. The proposed method of SL-PCE-IS is applied to three illustrative examples, which shows that the improved PCE method is more effective and efficient than the common PCEs method, leading to accurate estimations of small failure probabilities using fewer training samples.  相似文献   

级配碎石填料大三轴试验及累积塑性应变预测模型     

杨志浩  岳祖润  冯怀平  叶朝良  马德良 《岩土力学》2020,41(9):2993-3002

级配碎石作为重载铁路基床表层的主要填料，其受列车荷载的影响最大。因此，研究级配碎石在循环荷载作用下的动力行为及累积塑性应变演化特征变得尤为重要。首先，通过制备不同细粒含量的级配碎石填料，开展一系列大型动三轴试验，探究细粒含量、围压及动应力幅值对循环荷载作用下试样累积塑性应变的耦合影响机制。其次，基于塑性安定理论，确定不同应力水平下试样的动力行为，得到考虑围压及细粒含量参数的塑性蠕变状态临界动应力计算模型。最后，结合试验数据，建立考虑应力水平及细粒含量参数的塑性蠕变动力行为累积塑性应变预测模型，并明确各参数的物理意义。其研究成果可为既有重载铁路路基健康状态评估及考虑强度、变形综合控制的路基结构设计提供参考。  相似文献   

基于简化力学模型的隧道锚极限承载力估值公式     

王东英  汤华  尹小涛  杨光华  姜燕 《岩土力学》2020,41(10):3405-3414

悬索桥隧道式锚碇的设计理念为锚碇夹持岩体协同承载，因而承载能力远超同体积的重力式锚碇。但因目前对围岩协同作用认识尚不充分，在当前隧道式锚碇设计中仍保守地忽略锚碇和岩体间的挤压效应。为弄清锚碇?岩体协同承载的机制，揭示隧道锚承载能力提高的本质，通过分析隧道式锚碇建设至成桥全过程受力，建立隧道锚的简化力学模型，并引用Mindlin应力解分析了荷载沿锚碇轴向的传递规律以及荷载产生的作用于锚碇?岩体间的挤压应力分布，最终给出了隧道式锚碇极限承载力的简化估算方法，并通过伍家岗大桥隧道锚工程实例分析了结果的合理性。所得结论主要有：锚碇?岩体界面力主要由锚碇自重和锚碇?岩体相互挤压产生；锚碇?岩体界面附加应力自后锚面向前锚面呈先增后减的变化趋势，在距后锚面约1/3L处达到应力峰值；以容许抗剪强度为破坏判据解得的伍家岗长江大桥隧道式锚碇的极限承载力为3 504 MN，约为16倍的设计荷载，与室内试验值基本吻合。  相似文献   

季冻土区临水内、外拱护墙结构冻胀特征分析及治理     

孙洪伟  翟利杰  任望忠  傅汝进 《吉林大学学报(地球科学版)》2020,50(6):1833-1843

为厘清季冻土区临水内、外拱护墙结构冻胀平位移冻害机理，测试隔离层防冻害装置的有效性，在20101110-20110531、20131110-20140531、20171110-20180531三个观测年内，以长春某湖泊临水内、外拱护墙结构为研究对象，选择内、外拱护墙结构和设隔离层防冻害装置的试验内拱护墙结构三者相对比，用钢尺量距法观测三者寒期的平位移状态。结果表明：内拱护墙结构出现倾斜、裂缝导致的内向冻胀平位移冻害，其内向平位移曲线随气温均呈"半驼峰型"，对应观测年持续降温-持续低温-持续升温-正温时段，内向冻胀平位移呈减小-增大-减小-稳定残余的位移运动，诱因是平冻胀应力的生成-增长-减弱-消失作用；外拱护墙结构出现较小的外向冻胀平位移，外向冻胀平位移曲线均呈"波浪型"，无冻害发生，冰凸拱平冻胀应力推动外拱护墙结构压缩冻土凹拱形成外向冻胀平位移，冻土凹拱限制了外向冻胀平位移发展；设隔离层防冻害装置的试验内拱护墙结构未发生平位移冻害，其内向冻胀平位移较自然冻胀的内拱护墙结构减小83.92%，较外拱护墙结构减小51.74%，表明隔离层防冻害装置防治冻胀平位移冻害有效。  相似文献   

全球气候变化下南海诸岛保护优先区识别分析   总被引：3，自引：1，他引：2  

左秀玲  苏奋振  张宇  吴文周  吴迪 《地理学报》2020,75(3):647-661

全球变化下,珊瑚礁保护区是保护生物多样性、增强珊瑚礁对气候变暖抵抗力的有效方式,而维持珊瑚礁弹性是其核心内容。针对珊瑚礁最具有威胁性的热压力因子,基于南海1982—2009年卫星观测海表面温度（SST）数据和CMIP5加拿大地球系统模式CanESM2模型预估的2006—2100年南海SST数据构建热压力强度模型,从维持珊瑚礁弹性的角度识别IPCC RCP 4.5和RCP 8.5情景下南海诸岛保护优先区。结果表明：RCP 4.5和RCP 8.5情景下13%左右的南海诸岛珊瑚礁识别为保护优先区。根据热压力强度与珊瑚抵抗力及避难所关系,西沙群岛七连屿和晋卿岛近年观测与未来预估的热压力强度均比较低,在保障其服务功能的基础上建议实施完全保护;东沙群岛东沙环礁和中沙环礁排洪滩近年观测急性热压力强度较高但未来预估热压力强度较低,建议实施50%禁止利用保护;中沙群岛黄岩岛近年观测和未来预估的急性热压力强度均比较低,建议实施50%多用途保护。南沙群岛有14%左右的珊瑚礁识别为保护优先区,根据其热压力强度可实施30%~100%禁止利用保护或30%~50%多用途保护。RCP 4.5和RCP 8.5情景下的南海诸岛保护优先区及保护对策,可为维持珊瑚礁生态弹性及应对全球气候变化提供重要的参考价值。  相似文献